Devil Design ABS+ STARTPACK 1.75 mm, 6 x 0.330 kg

Technical data and information

Filament ABS+ is a thermoplastic material used for FDM 3D printing.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material: Large
Hotend: 230-240°C
Heated bed: 90-100°C
Cooling the printout: Not recommended
Surface of the material: Gloss
Spool - material: Transparent policarbonate

Physical properties of the material:

Specific Density: 1.04 g/cm3 / ASTM D792
Vicat Softening Temperature: 94°C ASTM D1525
Flammability: HB / UL 94
Rockwell Hardness (R-Scale): 105 / ASTM D785
Tensile Strength - Yield: 430 kg/sm2 / ASTM D638
Tensile Elongation - Break: 30% / ASTM D638

Подробно Product descriptions

Product contains 6 spools (white, red, black, bright green, bright yellow, blue) x 0.330 kg net material. Can be used by all open source FDM/ FFF printers.

Due to the different technical characteristics of the printers, the above characteristics should be considered as guidelines for 3D printing.