Devil Design PET-G filament 1.75 mm, 1 kg (2.0 lbs)

Technical data and information

Filament PET-G a thermoplastic polymer used for FDM 3D printing.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material Very low
Hotend: 220-250°C
Heated bed: 70-80°C
Cooling the printout: Optional
Surface of the material: High Gloss
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Physical properties of the material:

Specific Density: 1.23 g/cm3
Glass Transition Temperature: 80°C ASTM 3418
Moisture: ≤ 0.3%

Подробно Product descriptions

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material.

It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is a material friendly for beginners, material available in covering and transparent colors.

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing.