Devil Design PLA filament 1.75 mm, 1 kg (2.0 lbs) - full metallic

тел: +359 888 100 273
email: office@grema3d.com

Filaments

PLA

Devil Design PLA filament 1.75 mm, 1 kg (2.0 lbs) - full metallic

	Devil Design PLA filament 1.75 mm, 1 kg (2.0 lbs) - full metallic 38.34€ 0€ In stock Made in EU Easy to print High quality Biodegradable Country of origin: Poland, Devil Design Цвят Model PLA 1.75 - 38.34 €

Technical data and information

Filament PET-G a thermoplastic polymer used for FDM 3D printing.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material Very low
Hotend: 200-235°C
Heated bed: 50-60°C
Cooling the printout: Optional
Surface of the material: Gloss
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Product weight 1.0 kg net, 1.36 kg

Physical properties of the material:

Density: 1.24 g/cm3 / ASTM D1505
Elongation at Break: 160% / ASTM D882
Spencer Impact: 2.5 joules
Softening temperature: ~50°C

Подробно Product descriptions

PLA is a biodegradable material, produced from renewable natural resources.
It is dedicated primarily to amateurs due to trouble-free use.

Filament wound on a spool, vacuum packed with a moisture absorber.

The spool contains 1 kg of net material.

It can be used in all FDM/FFF printers that are not protected from external suppliers and open source structures before using.

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing.