Devil Design SILK filament 1.75 mm, 1 kg (2.0 lbs)

Technical data and information

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material: Very low
Hotend: 225-245°C
Heated bed: 50-60°C
Cooling the printout: Optional
Surface of the material: High gloss
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Product weight 1.0 kg net, 1.36 kg

Physical properties of the material:

Density: 1.23 g/cm3
Glass Transition Temperature: 80% / ASTM 3418
Moisture: ≤ 0.3%

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing.

Подробно Product descriptions

SILK filament – a thermoplastic material in the form of fiber, used for 3D-printing using.
Filament wound on a spool, vacuum packed with a moisture absorber.

The spool contains 1kg of net material. It can be used in all FFF/FDM printers that are not protected from external suppliers and open source structures before using.
SILK is mix of PLA and PET-G materials is characteristic by very high gloss (shiny).