Devil Design SILK STARTPACK 1.75 мм, 6 х 0.330 kg

Technical data and information

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material: Very low
Hotend: 225-245°C
Heated bed: 50-60°C
Cooling the printout: Optional
Surface of the material: High gloss
Spool - material: Transparent policarbonate
Product weight: 6 х 0.330 kg net

Physical properties of the material:

Density: 1.23 g/cm3
Glass Transition Temperature: 80% / ASTM 3418
Moisture: ≤ 0.3%

Подробно Product descriptions

SILK filament – a thermoplastic material in the form of fiber, used for 3D-printing using. SILK is mix of PLA and PET-G materials is characteristic by very high gloss (shiny). Filament wound on a spool, vacuum packed with a moisture absorber.

The spool contains 6x0.330 kg of net material.

It can be used in all FDM/FFF printers that are not protected from external suppliers and open source structures before using.

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing