Devil Design TPU filament 1.75 mm, 1 kg (2.2 lbs) - bright yellow

тел: +359 888 100 273
email: office@grema3d.com

Filaments

TPU

Devil Design TPU filament 1.75 mm, 1 kg (2.2 lbs) - bright yellow

	Devil Design TPU filament 1.75 mm, 1 kg (2.2 lbs) - bright yellow 38.34€ 0€ In stock Made in EU High quality High chemical resistance, including oils and grease Country of origin: Poland, Devil Design Цвят Model TPU 1.75 - 38.34 €

Technical data and information

Filament TPU a thermoplastic polymer used for FDM 3D printing.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.03 mm
Shrinkage of the material: Low
Hotend: 210-230°C
Heated bed: 20-80°C
Cooling the printout: Recommended
Low speed of printing recommended
Surface of the material: Light Gloss
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Product weight 1.0 kg net, 1.36 kg gross

Physical properties of the material:

Density: 1.23 g/cm3 / ISO 1183 - 1A
Hardness (Shore D): 55D / ISO 868
Tensile Strength: 44 MPA / ISO 37
Elongation at break: 400% / ISO 37
Tear strength: 180 N/mm / ISO 34 - 1B/b
Abrasion Resistance: 35 mm3 / ISO 4649

Подробно Product descriptions

TPU filament - thermoplastic polyurethane
Filament wound on a spool, vacuum packed with a moisture absorber.

The spool contains 1 kg of net material.

It can be used in all FFF/FDM printers that are not protected from external suppliers and open source structures before using.

The use of filament in printers with a bowden type extruder (with a filament guide tube) may be impossible or very difficult.

TPU is a material with high chemical resistance, including oils and greases.

Printouts from TPU are characterized by high flexibility and very good bonding of layers.