Grema 3D - Great Master LTD тел: +359 888 100 273
email: office@grema3d.com
3D PRINTERS / SCANNERS FDM/FFF Epitum - L - 3D printer

FDM/FFF Epitum - L - 3D printer
Epitum - L - 3D printer
Epitum - L - 3D printer
Epitum - L - 3D printer
Epitum - L - 3D printer
Epitum - L - 3D printer



Epitum L is a printer which secures high quality and each detail of models even if you print in high volumes. Your printer can create parts for assembling large objects and constructions. Control systems are available to ensure keeping printing with great volume of filaments under control.

  • JetSmart System - Improved print quality and fast changeover between two materials.
  • Automation - Embedded print management systems, proprietary software, available material profiles.
  • Active chamber heating - Helps create stronger models due to better layer sintering.
  • Large dimensions - Suitable for large models and prototype devices/mechanisms.


Technical data and information

Category Parameters
Printing technology Fused Filament Fabrication (FFF)
Fused Deposition Modeling (FDM)
Build Volume 360 х 360 х 610 mm
Extruder maximum printing temperature 430 ºC (806 F)
Heated bed maximum temperature 150 ºC (302 F)
Max chamber heating temperature 90 °C
Print speed up to 130 cm3/h
Minimum Layer Thickness 10 microns (0.01 mm)
Layer Resolution 0.01 – 0.8 mm (depending on the nozzle diameter)
Positioning Resolution 11 x 11 x 1.25 microns
Filament diameter 1.75 ± 0.1 mm
Nozzles diameter 0.5 mm in toolkit (0.2 - 1 mm) 
Casing Aluminum composite
Frame Steel
Heated bed construction Aluminum, glass
Guides XY cylindrical (steel)
Z cylindrical (steel)
Electricity 220 ± 15%, 50 Hz
(option 110 ± 15%, 60 Hz)
Maximum Power Consumption 2,2 kW
Networking Interfaces Wi-Fi, Ethernet, USB 2.0 (flash drive in toolkit)
Printing materials ABS, PLA, ASA, HIPS, PVA, TPU, PP, PETG, PA (6/12/66), ABS (GF/CF), PC, PEEK, PEKK, PPSU, SBS, PPS, WAX and other materials, including composites with CF and GF.
Printer dimensions 650 x 605 x 1000 mm
Weight 75 kg
Software Printoformer
File Types *.stl, *.amf, *.obj, *.3ds, *.eptf



Подробно Product descriptions

Features
- Primary systems
- Filament Flow Control
- End-of-Filament Sensor
- First Layer Control
- Built-in Profile System
- Network Printing
Additional features
- Filament drying mode
- Printer status notification system
- Auto-control workability of all systems
- Surface print control system
- Build plate Leveling
- Automatic leveling