eSUN water washable resin

Technical data and information

Resin model: standard water washable UV resin
Viscosity: 100 - 200 (25℃, MPa-s)
Wavelength: 395-410 nm
Density: 1.05-1.25 g/cm3
Tensile strength: 68 MPa
Elongation at break: 5-10 %
Modulus of Elongation: 900-1400 MPa
Flexural strength: 45-70 MPa
Impact strength Izod test: 18-39 J/m
Shore hardness: 78-82 D

Physical Properties:

	Testing method	Typical value
Density:	GB/T 4472	1.10-1.14 g/cm3
Viscosity:	GB/T 22235	110-180 mPa•s
Hardness:	ASTM D2240	74-82 Shore D
Tensile Strength:	ASTM D638	19-46 MPa
Elongation at Break:	ASTM D638	17-30%
Flexural Strength:	ASTM D790	15-50 Mpa
IZOD Impact Strength:	ASTM D638	37-97 J/m
Heat distortion Temperature:	GB/T 1634	N/A ℃

Recommended printing parameters:

Settings	Low Light Intensity	Medium Light Intensity
Exposure Time/s:	8-10	5-6
Bottom Layer Count:	-----------------------------	3-5
Bottom Exposure Time	40-60	30-40
Lifting Distance/mm	5.5&6-inch screen：5-6 or Higher	8.9&13.3-inch screen：8-12 or Higher
Lift Speed/mm•min-1	90-150	90-120
Retract Speed/mm•min-1	----------------------------	150-200

Подробно Product descriptions

It can be washed with water, saving the step of cleaning with alcohol,
greatly reduces post-processing time, improves printing efficiency and is cost-effective.
The forming precision is high, high resolution, the surface of the printed product is smooth.

Mechanical properties: strength, durability and hardness. Low viscosity.