Preparation(s) before starting to print:

Shake the bottle for at least 2 minutes before each use.

After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

The resin can be poured back from the vat into the bottle once your print is finished

Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing:

We do advise you to post-process your 3D print in order to achieve the material properties;

Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes;

An ultrasonic cleaner is preferred/recommended;

Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing;

Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes;

Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C;

The preferred curing wavelength is between 300-410nm.

Safety

Please always be aware that when 3D printing with resins that you should always be cautious.

Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.