FormFutura - Spectrum LCD Color Mix standard resin

Technical data and information

Tensile Et: 3730 MPa / ISO 527
Tensile strength at yield σM: 74.4 MPa / ISO 527
Strain at yield εM: 2.5% / ISO 527
Young‘s modulus ac: 12 kJ/m2 / ISO 179-2
HDT A: 74 °C / ISO 75
HDT B: 121 °C / ISO 75
Density ρ: 1.18 g/cm3 / ISO 1183

Printing parameters: Specimens are printed at 23°C and 50% humidity with
a 0.05mm layer height and 10 seconds exposure time per layer.
Post curing parameters: Specimens are 30min post cured with 200W 405nm UV LED conditioned for 72h at 23°C and 50% humidity.

Подробно Product descriptions

FormFutura "Spectrum LCD Color Mix - Standard Resin" is a high-quality 3D printing resin. This resin has
mechanical properties like PLA and thermal properties like ABS. Spectrum LCD Color Mix resin combines easy
printability with excellent heat resistance and stiffness. The ingenuous color mixing concept of Spectrum resins by adding Spectrum Color Pigments to the resin.

https://www.grema3d.com/en/product/formfutura-spectrum-colour-pigment-25-g/
You can even fine-tune your own colors by mixing pigments into a new color.

3D printing of end-use products;
Functional prototypes;
Creation of customised colour 3D models;
When properly stored and used, Spectrum LCD Color Mix - Standard Resin is technically usable for at least 12 months.