Please follow the settings and recommendations down below (also see the technical datasheet or product specifications) to avoid any damages (to the material itself, your printer or its components).
PEIJet 1010 is a material for advanced and skilled makers and rather industrial printers with specific printing options.
PRINTING SETUP
Nozzle: 360 °C
Heatbed: 120 - 150 °C
▪ Ultem is extremely susceptible to moisture and it can easily absorb water even from the air which can affect the strength of the final print.

It is necessary to dry the material preferably at 110 ° C before each use (in case of doubts - the spool is able to handle the heat as well). If you dry it properly, the resulting object may be equivalent in strength to, for example, an aluminum part.
▪ For printing, it is necessary to apply special glue (e.g. MAGIGOO HT) to the mat, for a perfect first layer we recommend to apply the glue in three layers.
▪ It is also necessary to use a printer with a closed chamber heated to at least 70° C.
▪ After it's printed, the material shrinks as the chamber gradually cools and, due to its strength, is able to damage the pad, so be sure to move the printout away as quickly as possible.

ADVANTAGES
✅ Extremely heat-resistant (more than 200°C) 
✅ Self-extinguishing UL94 V0 and 5VA 
✅ High durability 
✅ High chemical resistance
✅ Amorphous, transparent polymer

DISADVANTAGES

❌ Very difficult to print

❌ Susceptible to moisture

❌ The print has high internal stress when cooling - it is capable of damaging the print bed