Fiberlogy FiberFlex 40D filament 1.75, 0.850 кг (1.87 lbs) - black

Fiberlogy FiberFlex 40D filament 1.75, 0.850 кг (1.87 lbs) - black

Technical data and information

The following parameters are only suggested print settings for this material.

To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Oval tolerance: + 0.03 mm
Hotend: 200-220°C
Heated bed: 50°C-70°C
Closed chamber: not required
Fan: 50-75%
Flowrate: 105-110%
Printing Speed: <45 mm/s
Surface: glass, masking tape
Retraction (direct): 1-2 mm
Retraction Speed: 10-30 mm/s
Notes: To remove the print easier, it is recommended to heat the bed to 110°C

Mechanical properties	Test method	Unit	Typical Value
Hardness Shore D2240, 1 sec, 23°C	ISO 7619	-----------	40
Hardness Shore A, 1 sec, 23°C	ISO 7619	-----------	91
Density	ISO 1183	g/cm3	1.16
Break	ISO 527	MPa	28
5% Strain	ISO 527	MPa	2
10% Strain	ISO 527	MPa	4
50% Strain	ISO 527	MPa	9
Elongation at break	ISO 527	%	700
Heat Distortion Temperature @ 0.45 MPa	ISO 75	°C	70
Melting Temperature Tm	DSC	°C	160
Tear Strength	ISO 34-1	kN/m	115

Product descriptions

Fast and precise. FIBERFLEX 40D is the best proof of this. With this flexible material with Shore hardness of D40 you can print at the speed of 45mm/s without worrying about the quality of the print. What’s more, thanks to FIBERFLEX 40D you will discover that printing with flexible filaments doesn’t have to be difficult. Feeding it to the extruder will be extremely easy and the printed layers will stick together well.

Your prints will have such properties as: high impact resistance, low temperature resistance, chemical and abrasion resistance. Because of that FIBERFLEX 40D can be used for both amateur and professional applications.