Fiberlogy FiberWood filament 1.75, 0.750 кг (1.0 lbs) - brown

Technical data and information

The following parameters are only suggested print settings for this material.

To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.02 mm
Oval tolerance: + 0.01 mm
Hotend: 190-210°C
Heated bed: 50-70°C
Closed chamber: not required
Fan: 50-75%
Flowrate: 75-100%
Printing Speed: 35-60 mm/s
Surface: glass, masking tape
Retraction (direct): 2-3 mm
Retraction (bowden): 4-6 mm/s
Retraction Speed: 20-45 mm/s
Drying conditions: 50°C / 4h
Notes: To avoid a situation where the nozzle gets clogged with wood particles, we recommend cleaning the extruder after each FiberWood print by using any type of PLA filament. Recommended minimum 0,5 mm nozzle.

Physical properties	Test method	Unit	Typical value
Specific density	ISO 1183	g/cm3	1.23
Mechanical properties	Test method	Unit	Typical value
Tensile strength @ Yield	ISO 527	MPa	35
Tensile strength @ Break	ISO 527	MPa	31
Tensile modulus	ISO 527	MPa	2950
Elongation @ Yield	ISO 527	%	3
Elongation @ Break	ISO 527	%	6.5
Flexural strength	ISO 178	Mpa	-
Flexural modulus	ISO 178	MPa	-
Izod Impact strength (Notched) @ 23°C	ISO 180	kJ/m2	2
Thermal Properties	Test method	Unit	Typical value
Heat Distortion Temperature @ 0.45 Mpa	ISO 75	°C	55
Heat Distortion Temperature @ 1.8 Mpa	ISO 75	°C	50
Vicat Softening Temperature	ISO 306	°C	-----------
Glass Transition Temperature Tg	DSC	°C	55-60
Meting Temperature Tm	DSC	°C	155-160
Continuous Use Temperature (UL Yellow Card)	UL 746	°C	-

Product descriptions

Printing can be beautiful with FIBERWOOD.

This filament will make you feel like a true artist.

This material allows you to create stunning, wood-like prints.

But that’s not all. Your creations may become even more amazing.

You can grind and stain them in different ways. The final look of your print depends solely on your imagination.

The process of printing with the use of FIBERWOOD is already pleasant in itself – it is accompanied by an intriguing scent reminiscent of wood.

The reduced brittleness of the material also facilitates the flow of the filament to the extruder.

You can, therefore, create amazing prints without worrying about any problems.